Choosing a European Trailer Connector With Cables Supplier

In Europe, trailers are increasingly becoming connected, and the need for a good trailer connector is becoming increasingly important. This new connector has a unique PSI5 interface, which allows two twisted cables to communicate with each other and with the ECU. This interface supports a data rate of up to 189 kbits/s, and allows for the integration of further sensors and driver assistance systems.

The Europe Style 7+1 Pin Trailer Plug establishes a strong and secure connection between a trailer and tow vehicle. This plastic plug has seven pins and a screw connection that enables it to be inserted into existing towbars and vehicles. This connector is made for new trailers, but can also be used to replace damaged sockets on older vehicles.

When purchasing a trailer connector, look for one that has been tested for the type of connection it will be making. There are several European trailer connector standards. You can also look for a 13-pin trailer connector. It has several advantages over a 7-pin connector, including better weather protection and positive locking.

Having two connectors may cause some problems. Several car manufacturers may refuse to use a second one. Moreover, it may require additional installation space. Also, a second trailer socket might be problematic if it is not compatible with existing car electrical systems. A new connector can be an independent technical solution, but it must match existing connection patterns.

Choosing a trailer adapter with a plug-and-play design makes this conversion as easy as possible. A plug-and-play connector also reduces the hassle of installing new wiring. A dust cover is included on the American side of the connector. This adapter is a great choice for those who wish to have two sets of lights and brake lights.

A Pollak 7-way trailer connector has a white wire that acts as a ground. The white wire should be connected directly to the frame of the trailer. The yellow/black wire is typically the running light. The yellow/black wire is a running light. The two wires should be connected to each other. If you're unsure, use a jumper wire from your vehicle battery to test each circuit.

The distributor of these connectors specializes in electrical components for a wide range of industries. The product range includes 2 contact, 3-contact, and 4-contact connectors. It also offers cable ties, copper lugs, and extension cords. In addition, it also distributes goose neck, 5th wheel, and trailer hitches. Other services include welding, forming, and powder coating.