+86 139 5839 9009 +86 18867872829

News.
Jiahui Automobile

A Professional & Reliable Trailer Accessories Manufacturer

A Custom European Trailer Connector is an ideal solution

Date:2022-10-08
Custom European Trailer Connector
A Custom European Trailer Connector is an ideal solution for the installation of wiring from a trailer to a vehicle. In addition, the connectors can handle multiple signals simultaneously, including brake lights, turn signals, and position lights. A CURT Custom European Trailer Connector is a perfect solution for installing trailer light wiring. CURT custom wiring is easy to install, and it is backwards compatible with standard 4 and 5-pin flat connectors.
CURT custom wiring is the ideal solution for installing trailer light wiring
Custom wiring harnesses provide a quick and easy way to install trailer lights on your vehicle. They include a vehicle-specific connector and plug and make it possible to connect all of your trailer lights with one convenient connection. They also come with a converter and integrated taillights that integrate with the taillights of your vehicle. The wiring harnesses are easy to install and come with step-by-step instructions for each vehicle model.
Properly mounting the trailer light is the first step in installing trailer lights. Ensure the surface is clean and free of paint. Next, connect the wires to the light stud. If you're using LED lights, check whether you've attached the fifth wire to the reverse circuit of your vehicle. You can also install a CURT trailer light wiring kit that allows you to install multiple lights at once.
SAE J560 is not backwards compatible with 4-pin and 5-pin flat connectors
When wiring your RV, you'll want to choose a plug that meets the latest standards. The SAE J2863 Automotive Trailer Tow Connector defines the connector standard for RVs. This connector also defines the requirements for reversing lights and surge brakes. Many light trucks use this connector, which contains minimum signals for compliance in the United States. The extra connection is usually used to block surge brakes when reversing.
If you already have a trailer with a four-pin connector, a 7-pin to 5-pin adapter may be the right choice. This adapter allows you to connect a four-pin trailer to a 5-pin vehicle with no problem. If your trailer uses disc brakes, you can use a 5 pin connector.
While the SAE J560 custom European trailer connector does not work with older 4 and 5-pin flat connectors, the new connectors will support the latest technology, including safety systems. The new connectors are designed for use with the upcoming RV-C regulations. However, these connections are not backwards compatible with four and five-pin flat connectors.
The SAE J560 connector is backwards compatible with ISO 1185. However, a 7-pin connector has some interchangeability issues. It's better to stick with the 12-pin type 3 connector if your trailer is equipped with auxiliary circuits. Also, a single axle trailer must be equipped with an efficient braking system. Moreover, the brakes must be operable from the driver's seat of the towing vehicle.
Diode and relay wiring is preferred
When you're looking for a custom European trailer connector, you need to decide whether to use diode and relay wiring or a traditional socket. In general, you'll want to choose the former over the latter. A diode-and-relay wiring system is preferable for trailers that have a lot of lights. Alternatively, a 58L socket will suffice for a simpler light arrangement.
A diode and relay wiring system will ensure that the lights on your trailer are always on, even when your vehicle is off. The diode-and-relay wiring scheme will prevent thermal flashing on older vehicles, and it also will not interfere with the operation of the tow vehicle's brake lights. When you're installing a custom European trailer connector, you should make sure that your vehicle's ignition switch is not off.
When you're installing a custom European trailer connector, it's important to select a system that uses a high-quality diode and relay wiring. These circuits have the highest level of reliability. Diode and relay wiring are compatible with all types of trailers. This system is easy to install and is highly recommended for custom trailers. It also offers numerous benefits, including ease of use and flexibility.

Ningbo Jiahui Auto Parts Co., Ltd. is professional China European Style Trailer Connector Manufacturer and supplier of trailer parts. Our main products include trailer plug, trailer socket, trailer lamp, trailer cable, trailer board, etc. The company has advanced production equipment, excellent technical personnel and perfect testing equipment and methods. Custom made European Style Trailer Connector is welcomed. Our products are of reliable quality. We have rich experience in developing new products to meet the needs of customers.